Category S13 Type X build

Nissan S13 Type X (Kouki) build #12

I test fitted the Recaro SR3 Falcon seats and installed Solarplexius sunprotection glasses! The S13 got a bit of love the last days. I started with removing the original seats and vaccuumed the interior a bit. While doing that, I… Continue Reading →

Nissan S13 Type X (Kouki) build #11

After many hours of work on the Vanette, I was able to show the S13 some love. I finally disassambled, cleaned and polished the ARC Super Induction Box. The ARC badge was a pain in the a** to get off… Continue Reading →

Nissan S13 Type X (Kouki) build #10

Future plans for the S13 The S13 is currently asleep in a safe place to get through the Winter. In the meantime I was able to get hands on some very rare JDM goodies for the old Japanese lady, so… Continue Reading →

Nissan S13 Type X (Kouki) build #9

Turbo change and first big ride of the year I finally got a big garage where I can work on my cars. Just built in a working bench including a vice and big space for my tools. Due to the… Continue Reading →

Nissan S13 Type X (Kouki) build #8

Final steps of preparation and full vinyl wrapping after getting the preparated fine spatula sanded, we was able to start wrapping the car. Started with doors and front fenders, then to the hood and going furth with the rear quarter… Continue Reading →

Nissan S13 Type X (Kouki) build #7

Bodywork and preparations for vinyl wrapping Today we started the preparation for getting the car wrapped properly and easy. We disassembled the hood, front and rear bumper, filler cap cover, popup covers, tail lights, mirrors and door trim pieces. I… Continue Reading →

Nissan S13 Type X (Kouki) build #6

Exterior color decision and GP Sports spoiler I finally made a decision about the color my car will get. It will get wrapped in the 3M Black Rose gloss vinylwrap. In my opinion this color, with its amazing fade in… Continue Reading →

Nissan S13 Type X (Kouki) build #5

CPU upgrade and exterior color plans due to the changes in the air intake and intercooler, I am going to upgrade to another ECU, which allows the engine to run with the correct air-fuel ratio. I got hands on a… Continue Reading →

Nissan S13 Type X (Kouki) build #4

Interior plans and Gauge upgrade Last christmas I got me some [Hoonigan] – AutoMeter Gauges, which should be pretty known to all of you, because they are also built in Ken Block’s legendary Hoonicorn. I got a 3D printed gauge… Continue Reading →

Nissan S13 Type X (Kouki) build #3

Brake upgrade I chose the 300ZX (Z32) brake setup, with 4 pistons at the front calipers and 2 pistons at the rear calipers. This is a huge upgrade to the original 2 and 1 piston swing saddle setup. Just stripped… Continue Reading →

« Older posts

© 2021 Carbuto — Powered by WordPress

Theme by Anders NorenUp ↑